CAPRA AL Comp 1
usually: AUD 5,199.00
includes import tax & duty
It is no coincidence that we named our enduro bike CAPRA, i.e. goat. Because just like a goat, the CAPRA masters every terrain. Aggressive design and fun-oriented geometry promise Good Times as of the first glance. A promise that is fulfilled once you get on the bike, because the CAPRA is what you make of it: A downhill bike that can also carry you back up the mountain, an enduro bike that rocks any bike park - truly a bike for any mission. This hardy beast provides plenty of stability and control, and goes around corners as if by itself. So get off the brakes and pin it!
The heart of the CAPRA is the hydro formed aluminum frame with carbon seat stays. To optimize the frame weight the tubes are multi-butted. The tube walls have been given extra thickness where required to stand up to the strong forces generated in critical areas. Or to talk plainly: 165-mm of quality suspension travel coupled with neutral riding characteristics and an optimal climbing position make for that perfect ride feel.
The V4L rear linkage is our proven recipe for providing a linear and sensitive suspension response. Developed by YT, critically acclaimed and often prized, V4L is progressive throughout the travel to prevent excessive sagging and harsh bottom outs. It holds you up in the travel and reacts only when it’s supposed to, namely to overcome obstacles on the trail and not under the influence of pedaling forces. This helps making the CAPRA a weapon on the uphill too. A slack head angle and 650B (27.5”) wheels contribute to the extreme directional stability of the CAPRA and make it seem like it has even more travel. To make sure the bike doesn’t mutate into a sluggish mothership, we kept the chain stays on the short side. All in all, the CAPRA lets you feel like you are really sitting in the bike.
The Comp 1 switches into Beast Mode for 2016, it is the perfect companion for aggressive trail riding. With the all-new and highly acclaimed RockShox Lyrik RCT3, the proven Guide R brakes and the 1x11 drivetrain from SRAM, it is up for any and all challenges. With the AL Comp 1 you can confidently participate at any enduro race and look forward to lighting up the trail as well as your competitors.
FrameCAPRA Aluminium 27,5"
hydro-formed aluminum frame, carbon seat stays, X12 (142x12mm), DT Swiss through axle
Rear DerailleurSRAM GX
1x11spd, Type 2.1, aluminum, black
WheelsetDT Swiss E1900 SPLINE 27,5
27,5", FW 15x100, RW 12x142 Thru Axle, XD Driver
ShockRockShox Monarch Plus RC3
air shock, 3 position compression (low, mid, firm), external rebound, 8,75"x2,75" / 222mm x 66mm, high volume
Front TireMaxxis High Roller II
27,5"x 2,4", EXO, MaxxPro
ForkRockShox Lyrik RCT3
air fork, 3-position compression (low/mid/firm) low speed compression, external rebound, Charger RCT3 damper cartridge, solo air, tapered steerer, 15x100 axle, 170mm travel
CassetteSRAM XG 1150 10-42
Rear TireMaxxis High Roller II
27,5"x 2,4", EXO, MaxxPro 60a
Travel front/rear170mm / 165mm
11spd, with PowerLock
StemRACE FACE Atlas
50mm, 35mm clamp
BrakesSRAM Guide R
4-piston caliper, tool-free reach adjust, DOT 5.1
HandlebarRACE FACE Atlas (770)
770mm, 35mm Rise, 8° backsweep, 5° upsweep, 35mm clamp
CranksetRACE FACE Turbine Cinch 1x11
170mm length, 32 teeth chainwheel
Discs front/rearSRAM Centerline
Stealth, Ø31,6mm, S: 125mm, M-XL: 150mm
Bottom BracketRace Face PF30
ergonomic construction, CroMo seat stays
Chain Guidee*thirteen TRS+
ISCG05, 32-34 teeth, black sliders
Pedalswithout / ohne
At the end of the ordering process, you can add high-quality pedals at special rates to your shopping cart.
Frame SizeS / M / L / XL
for the size that suits you best, please check the sizing-chart above
Weight13,9 kg / 30,6 lb
*Weight measured without pedals in frame size S. Due to manufacturing tolerances of the individual components the bike weight may differ +/- 2%.
*Please note that the pictures may differ from the actual specifications.
|A Toptube length||556,9 mm||582,0 mm||608,2 mm||626,3 mm|
|B Reach||398 mm||420 mm||443 mm||458 mm|
|C Stack||587,5 mm||596,6 mm||605,6 mm||614,7 mm|
|D Seattube length||400 mm||450 mm||480 mm||510 mm|
|E Chainstay length||430 mm||430 mm||430 mm||430 mm|
|F Headtube angle||65 °||65 °||65 °||65 °|
|G Seattube angle (eff.)||74,8 °||74,8 °||74,8 °||74,8 °|
|H BB Drop||4 mm||4 mm||4 mm||4 mm|
|I Wheelbase||1149,4 mm||1175,6 mm||1202,8 mm||1220,0 mm|
|J Headtube length||100 mm||110 mm||120 mm||130 mm|
|K Standover height||755,9 mm||753,7 mm||766,6 mm||768,5 mm|